关于我们

质量为本、客户为根、勇于拼搏、务实创新

< 返回新闻公共列表

linux下ntp服务器的搭建步骤

发布时间:2021-09-21 13:20:37

本篇内容主要讲解“linux下ntp服务器的搭建步骤”,感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷,实用性强。下面就让56云小编来带大家学习“linux下ntp服务器的搭建步骤”吧!


一、搭建时间服务器
1、在一台linux服务器安装ntp server

tar zxvf ntp-4.2.6.tar.gz
cd ntp-4.2.6
./configure --prefix=/usr/local/ntp --enable-all-clocks --enable-parse-clocks
make && make install

2、修改ntp.conf配置文件
vi  /etc/ntp.conf
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
#restrict default kod nomodify notrap nopeer noquery
restrict  default  nomodify
(允许任何IP的客户机都可以进行时间同步,如果是只允许某个网段的客户机进行时间同步可以这样写
restrict 10.58.26.0 mask 255.255.255.0 nomodify)

restrict -6 default kod nomodify notrap nopeer noquery

# Permit all access over the loopback interface.  This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1

# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool
#server 0.rhel.pool.ntp.org(默认时间服务器)
#server 1.rhel.pool.ntp.org(默认时间服务器)
#server 2.rhel.pool.ntp.org(默认时间服务器)
 server 10.128.14.25  (手工设置的时间服务器)
(如果是可以直连外网,可以使用LINUX默认提供的三组标准时间服务器,否则可以自己指定一个同步时间源)

#broadcast 192.168.1.255 key 42         # broadcast server
#broadcastclient                        # broadcast client
#broadcast 224.0.1.1 key 42             # multicast server
#multicastclient 224.0.1.1              # multicast client
#manycastserver 239.255.254.254         # manycast server
#manycastclient 239.255.254.254 key 42  # manycast client

# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available.
server  127.127.1.0     # local clock
fudge   127.127.1.0    stratum 10
 

3、以守护进程启动ntpd
  #/etc/rc.d/init.d/ntpd  -c  /etc/ntp.conf  -p  /tmp/ntpd.pid
  #/etc/rc.d/init.d/ntpd start
  #ps -ef|grep ntpd

4、在ntp server上启动ntp服务后,ntp server自身或者与其server的同步的需要一个时间段,这个过程可能是5分钟,在这个时间之内在客户端运行ntpdate命令进行同步时会产生no server suitable for synchronization found的错误。

那么如何知道何时ntp server完成了和自身同步的过程呢?

在ntp server上使用命令:

# watch ntpq -p


注意LOCAL的这个就是与自身同步的ntp server。

注意reach这个值,在启动ntp server服务后,这个值就从0开始不断增加,当增加到17的时候,从0到17是5次的变更,每一次是poll的值的秒数,是64秒*5=320秒的时间。
 

二、配置时间同步客户机
vi  /var/spool/cron/root(或crontab -e)

增加一行,在每天的1点10分、9点10分、17点10分与时间同步服务器进行同步并写入BIOS

10 1 ,9,17* * *  root  /usr/sbin/ntpdate 10.128.14.25; /sbin/hwclock -w

* /2 * * * * root  /usr/sbin/ntpdate 10.128.14.25; /sbin/hwclock -w

 如果同步不正常,可以加输出日志或看系统日志
输出日志的方法:
10 1 ,9,17* * *  root  /usr/sbin/ntpdate 10.128.14.25>>/tmp/1.txt; /sbin/hwclock -w
在1.txt中可查看时间同步时的输出结果。
或者看/var/mail/root系统日志
Subject: Cron <root@tyzssq8> /usr/sbin/ntpdate 10.128.14.25;/sbin/hwclock -w
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
X-Cron-Env: <USER=root>
Message-Id: <20121127103001.076FF2090E@tyzssq8.site>
Date: Tue, 27 Nov 2012 18:30:01 +0800 (CST)

27 Nov 18:29:59 ntpdate[6917]: step time server 10.128.14.25 offset -1.361968 sec

可以看到同步成功了,如果未成功会报出错误。
 

三、无法同步的问题

检查ntp server主机的防火墙。可能是ntp server的防火墙屏蔽了upd 123端口。

可以用命令

#service iptables stop

来关掉iptables服务后再尝试从ntp客户端的同步,如果成功,证明是防火墙的问题,需要更改iptables的设置。 

到此,相信大家对“linux下ntp服务器的搭建步骤”有了更深的了解,不妨来实际操作一番吧!这里是56云网站,更多相关内容可以进入相关频道进行查询,关注我们,继续学习!



/template/Home/Zkeys/PC/Static